Screw Type Inner Hinge Pin, 2pcs with M4 Nuts, for Mayako MX8 (-23-25)

A-Block for Screw Type Hinge Pin - Rear Insert, for Mayako MX8 (-22-5)

A-Block with Insert Backward for captured Hingepin DesignYou need MYB0026B1CF - Carbon A Block Spacer Middle and End, for MYB0027B1 in addition...

$23.99

A-Block for Mayako MX8 for Screw Type Inner Hinge Pin (-24-25) - Discontinued

This Part is discontinued! A Block(2022) for captured Arm HingepinReplacement Parts to switch to new Design for the Frontend: 1x MYB0026B1CF - Carbon A Block Spacer Middle and End, for MYB0027B11x MYB0027B1 - A-Block for Screw Type Hinge Pin for Mayako MX8 - Insert Backward (-23)1x MYB0028A - B-Block for Mayako MX8 for Screw Type Inner Hinge Pin (-22)1..

$19.19

Out of Stock

B-Block for Screw Type Inner Hinge Pin, for Mayako MX8 (-23-25)

B-Block for Mayako MX8 for Screw Type Inner Hinge Pin. These blocks are stock on -23 and newer models. They work on older models also, but you need to replace both blocks and use the screw type hinge pins...

$23.99

C-Block (Screw Type Inner Hinge Pin), use with MYB0030A for 3deg (48.5), for Mayako MX8 (-23-25)

3deg - C Block(2022) for captured Arm Hingepin..

$23.99

C-Block 50mm (Screw Type Inner Hinge Pin), use with MYB0030-01A for 1.5deg, for Mayako MX8 (-23-25)

C-Block 50mm for Mayako MX8 for Screw Type Inner Hinge Pin. These blocks are stock on -23 and newer models. They work on older models also, but you need to replace both blocks and use the screw type hinge pins...

$23.99

C-Block 51mm (Screw Type Inner Hinge Pin), use with MYB0030-02A for 0.5deg, for Mayako MX8 (-23-25)

0.5deg - C Block(2022) for captured Arm Hingepin..

$23.99

D-Block (Screw Type Inner Hinge Pin), use with MYB0029A for 3deg (54.5), for Mayako MX8 (-23-25)

3deg - D Block(2022) for captured Arm Hingepin..

$23.99

D-Block (Screw Type Inner Hinge Pin), use with MYB0029-01A for 1.5deg (53), for Mayako MX8 (-23-25)

1.5deg - D Block(2022) for captured Arm Hingepin..

$23.99

D-Block (Screw Type Inner Hinge Pin), use with MYB0029-02A for 0.5deg (52), for Mayako MX8 (-23-25)

0.5deg - D Block(2022) for captured Arm Hingepin..

$23.99

Carbon A Block Spacer Middle and End, use with MYB0027B1 for Mayako MX8 (-22-25)

Middle and End Carbon Diff Height Insert for MYB0027B1..

$9.99

C-Block 54mm, use with MYB0030-03A for 1.5deg, for Mayako MX8 (-23-25)

C-Block Wide 54mm, use with MYB0030-03A for 1.5deg, for Mayako MX8 (-24)If you want to get more rear support and more rotation off power use these wide blocks. You must use with the adjustable rear arms MYB0036-01 But beware, the car will become harder to drive too. ..

$23.99

D-Block Low 53mm, use with MYB0029-01A for 1.5deg, for Mayako MX8 (-23,-25)

Lower D-Block so you can run a lot of anti-squat and with a low arm position.With the height insert in the middle on this block, the D-Block height is the same as lowered 1mm on the stock D-Block...

$23.99

D-Block 57mm, use with MYB0029-03A for 1.5deg, for Mayako MX8 (-23-25)

C-Block Wide 54mm, use with MYB0030-03A for 1.5deg, for Mayako MX8 (-24)If you want to get more rear support and more rotation off power use these wide blocks. You must use with the adjustable rear arms MYB0036-01 But beware, the car will become harder to drive too...

$23.99

MAXIMUM

Express Order