Diff & Drivetrain
Lightweight knurled wheel nuts for Mayako MX8 (-22).2.5g saved over MYB0060..
$14.99
Lightweight knurled wheel nuts for Mayako MX8 (-22).2.5g saved over MYB0060..
$14.99
Plastic Bearing Bushings for the bearings in MYB0050 Plastic rear hub and MYB0050-01 Aluminum left or right rear hub for Mayako MX8 (-22)...
$8.99
Plastic Bearing Bushings for the bearings in MYB0050 Plastic rear hub and MYB0050-01 Aluminum left or right rear hub for Mayako MX8 (-22)...
$8.99
To use this dogbone, you also need MYB0120, Centre Dogbone Outdrive (2pcs) for Mayako MX8 (-22).This dogbone is intended for the standard length chassis MYB0001 for Mayako MX8 (-22)...
$15.99
To use this dogbone, you also need MYB0120, Centre Dogbone Outdrive (2pcs) for Mayako MX8 (-22).This dogbone is intended for the standard length chassis MYB0001 for Mayako MX8 (-22)...
$15.99
To use this dogbone, you also need MYB0120, Centre Dogbone Outdrive (2pcs) for Mayako MX8 (-22).This dogbone is intended for the +4mm length chassis MYB0001-01 for Mayako MX8 (-22)...
$15.99
To use this dogbone, you also need MYB0120, Centre Dogbone Outdrive (2pcs) for Mayako MX8 (-22).This dogbone is intended for the +4mm length chassis MYB0001-01 for Mayako MX8 (-22)...
$15.99
Rear Centre 115mm Universal Driveshaft used with MYB0001-01 Long +4mm rear chassi for Mayako MX8 (-22)...
$26.99
Rear Centre 115mm Universal Driveshaft used with MYB0001-01 Long +4mm rear chassi for Mayako MX8 (-22)...
$26.99
Rear Centre 111mm Universal Driveshaft used with MYB0001 3mm (Stock) chassi for Mayako MX8 (-22)...
$26.99
Rear Centre 111mm Universal Driveshaft used with MYB0001 3mm (Stock) chassi for Mayako MX8 (-22)...
$26.99
Rear CVD Bearing Crush Washers for Mayako MX8 (-22)...
$5.99
Rear CVD Bearing Crush Washers for Mayako MX8 (-22)...
$5.99
This Part is discontinued!
Standard shaft in regional kits. Ues the normal size 8X16x5 bearing on the inside of hub...
$44.79
This Part is discontinued!
Standard shaft in regional kits. Ues the normal size 8X16x5 bearing on the inside of hub...
$44.79
This Part is discontinued!
Optional rear universal shaft (standard in EU kit) with this you also need to change to the bigger 13X19X4 bearings in the hub.Parts needed to run 94mm rear unversal:MYB0052-01 Rear Universal Driveshaft Pair 94mmMYB0168 13x19x4mm Ball Bearing2x MYB0048 Rear Bearing Crush Washer..
$44.79
This Part is discontinued!
Optional rear universal shaft (standard in EU kit) with this you also need to change to the bigger 13X19X4 bearings in the hub.Parts needed to run 94mm rear unversal:MYB0052-01 Rear Universal Driveshaft Pair 94mmMYB0168 13x19x4mm Ball Bearing2x MYB0048 Rear Bearing Crush Washer..
$44.79
This Part is discontinued!
4mm wheel hexes, recomended to use on the front end of the car if width is on the limit in the boxes used in technical inspection at races...
$15.99
This Part is discontinued!
4mm wheel hexes, recomended to use on the front end of the car if width is on the limit in the boxes used in technical inspection at races...
$15.99
This Part is discontinued!
5mm wheel hexes, stock hexes that comes in the MX8 kits. Note that if you use the 3-piece rear hub you will need the 6mm wheel hexes to have the same width MYB0059-02...
$15.99
This Part is discontinued!
5mm wheel hexes, stock hexes that comes in the MX8 kits. Note that if you use the 3-piece rear hub you will need the 6mm wheel hexes to have the same width MYB0059-02...
$15.99
